PathScripts.PathDressupRampEntry.ObjectDressup Class Reference

Public Member Functions

def checkIgnoreAbove (self, edge)
 
def createCommands (self, obj, edges)
 
def createHelix (self, rampedges, startPoint, endPoint)
 
def createRampEdge (self, originalEdge, startPoint, endPoint)
 
def createRampMethod1 (self, rampedges, p0, projectionlen, rampangle)
 
def createRampMethod2 (self, rampedges, p0, projectionlen, rampangle)
 
def createRampMethod3 (self, rampedges, p0, projectionlen, rampangle)
 
def execute (self, obj)
 
def findMinZ (self, edges)
 
def generateHelix (self)
 
def generateRamps (self, allowBounce=True)
 
def getreversed (self, edges)
 
def getSplitPoint (self, edge, remaining)
 
def onChanged (self, obj, prop)
 
def onDocumentRestored (self, obj)
 
def setEditorProperties (self, obj)
 
def setup (self, obj)
 

Public Attributes

 angle
 
 ignoreAbove
 
 ignoreAboveEnabled
 
 method
 
 obj
 
 outedges
 
 rapids
 
 wire
 

Member Function Documentation

◆ checkIgnoreAbove()

◆ createCommands()

def PathScripts.PathDressupRampEntry.ObjectDressup.createCommands (   self,
  obj,
  edges 
)

◆ createHelix()

def PathScripts.PathDressupRampEntry.ObjectDressup.createHelix (   self,
  rampedges,
  startPoint,
  endPoint 
)

◆ createRampEdge()

◆ createRampMethod1()

def PathScripts.PathDressupRampEntry.ObjectDressup.createRampMethod1 (   self,
  rampedges,
  p0,
  projectionlen,
  rampangle 
)
This method generates ramp with following pattern:
1. Start from the original startpoint of the plunge
2. Ramp down along the path that comes after the plunge
3. When reaching the Z level of the original plunge, return back to the beginning
   by going the path backwards until the original plunge end point is reached
4. Continue with the original path

This method causes many unnecessary moves with tool down.

References PathScripts.PathDressupRampEntry.ObjectDressup.createRampEdge(), PathScripts.PathDressupRampEntry.ObjectDressup.getreversed(), and PathScripts.PathDressupRampEntry.ObjectDressup.getSplitPoint().

Referenced by PathScripts.PathDressupRampEntry.ObjectDressup.generateRamps().

◆ createRampMethod2()

def PathScripts.PathDressupRampEntry.ObjectDressup.createRampMethod2 (   self,
  rampedges,
  p0,
  projectionlen,
  rampangle 
)
This method generates ramp with following pattern:
1. Start from the original startpoint of the plunge
2. Calculate the distance on the path which is needed to implement the ramp
   and travel that distance while maintaining start depth
3. Start ramping while traveling the original path backwards until reaching the
   original plunge end point
4. Continue with the original path

References PathScripts.PathDressupRampEntry.ObjectDressup.createRampEdge(), and PathScripts.PathDressupRampEntry.ObjectDressup.getSplitPoint().

Referenced by PathScripts.PathDressupRampEntry.ObjectDressup.generateRamps().

◆ createRampMethod3()

def PathScripts.PathDressupRampEntry.ObjectDressup.createRampMethod3 (   self,
  rampedges,
  p0,
  projectionlen,
  rampangle 
)
This method generates ramp with following pattern:
1. Start from the original startpoint of the plunge
2. Ramp down along the path that comes after the plunge until
   traveled half of the Z distance
3. Change direction and ramp backwards to the original plunge end point
4. Continue with the original path

This method causes many unnecessary moves with tool down.

References PathScripts.PathDressupRampEntry.ObjectDressup.createRampEdge(), PathScripts.PathDressupRampEntry.ObjectDressup.getreversed(), and PathScripts.PathDressupRampEntry.ObjectDressup.getSplitPoint().

Referenced by PathScripts.PathDressupRampEntry.ObjectDressup.generateRamps().

◆ execute()

def PathScripts.PathDressupRampEntry.ObjectDressup.execute (   self,
  obj 
)

References SoGestureSwipeEvent.angle, DraftGui.DraftToolBar.angle, draftguitools.gui_arcs.Arc.angle, draftguitools.gui_rotate.Rotate.angle, drafttaskpanels.task_polararray.TaskPanelPolarArray.angle, ap203_configuration_controlled_3d_design_of_mechanical_parts_and_assemblies_mim_lf.revolved_area_solid.angle, ap203_configuration_controlled_3d_design_of_mechanical_parts_and_assemblies_mim_lf.polar_complex_number_literal.angle, ap203_configuration_controlled_3d_design_of_mechanical_parts_and_assemblies_mim_lf.runout_zone_orientation.angle, ap203_configuration_controlled_3d_design_of_mechanical_parts_and_assemblies_mim_lf.revolved_face_solid.angle, automotive_design.revolved_area_solid.angle, automotive_design.runout_zone_orientation.angle, automotive_design.revolved_face_solid.angle, ifc2x3.ifcrevolvedareasolid.angle, ifc4.ifcrevolvedareasolid.angle, GCS::ConstraintP2PAngle.angle(), GCS::ConstraintL2LAngle.angle(), GCS::ConstraintAngleViaPoint.angle(), Measure::Measurement.angle(), Measure::MeasurementPy.angle(), PartGui::DimensionAngular.angle, PartGui::ArcEngine.angle, PartDesign::Hole::CutDimensionSet.angle, Mod.PartDesign.fcgear.fcgeardialog.GearCreationFrame.angle, geoff_geometry::Span.angle, PathScripts.PathDressupDogbone.Bone.angle(), PathScripts.PathDressupHoldingTags.Tag.angle, PathScripts.PathDressupRampEntry.ObjectDressup.angle, PathScripts.PathDressupTag.TagSolid.angle, KDL::RotationalInterpolation_SingleAxis.angle, TechDraw::incidenceItem.angle, TechDraw::Ellipse.angle, PathScripts.PathDressupRampEntry.ObjectDressup.createCommands(), PathScripts.PathDressupRampEntry.ObjectDressup.generateHelix(), PathScripts.PathDressupRampEntry.ObjectDressup.generateRamps(), PathScripts.PathDressupRampEntry.ObjectDressup.ignoreAbove, PathScripts.PathDressupRampEntry.ObjectDressup.ignoreAboveEnabled, Gui::Dialog::DlgSettingsImageImp.method(), ap203_configuration_controlled_3d_design_of_mechanical_parts_and_assemblies_mim_lf.action_request_solution.method, automotive_design.action_request_solution.method, config_control_design.action_request_solution.method, MeshGui::DlgSmoothing.method(), MeshGui::SmoothingDialog.method(), Py::MethodTable.method(), MeshPart::Mesher.method, geoff_geometry::SpanDataObject.method, PathScripts.PathDressupRampEntry.ObjectDressup.method, DrawSketchHandlerEllipse.method, PathScripts.PathDressupRampEntry.ObjectDressup.outedges, PathScripts.PathDressupLeadInOut.ObjectDressup.rapids, PathScripts.PathDressupRampEntry.ObjectDressup.rapids, Mod.PartDesign.fcgear.fcgear.FCWireBuilder.wire, Mod.PartDesign.fcsprocket.fcsprocket.FCWireBuilder.wire, WireInfo.wire, PathScripts.PathDressupLeadInOut.ObjectDressup.wire, PathScripts.PathDressupRampEntry.ObjectDressup.wire, PathScripts.PathDressupTag.ObjectDressup.wire, and PathScripts.PathPocketShape.Extension.wire.

Referenced by draftobjects.facebinder.Facebinder.addSubobjects(), PathScripts.PathDressupDogbone.ObjectDressup.boneStateList(), ArchSite.Compass.buildCoordinates(), PathScripts.PathDressupHoldingTags.ObjectTagDressup.generateTags(), ArchPanel.PanelCut.getWires(), ArchSchedule.CommandArchSchedule.IsActive(), Mod.PartDesign.Scripts.DistanceBolt.DistanceBolt.onChanged(), Mod.PartDesign.Scripts.Epitrochoid.Epitrochoid.onChanged(), Mod.PartDesign.Scripts.Parallelepiped.Parallelepiped.onChanged(), Mod.PartDesign.Scripts.Parallelepiped.BoxCylinder.onChanged(), Mod.PartDesign.Scripts.Spring.MySpring.onChanged(), FeaturePython.DistanceBolt.onChanged(), PathScripts.PathStock.StockFromBase.onChanged(), PathScripts.PathStock.StockCreateBox.onChanged(), PathScripts.PathStock.StockCreateCylinder.onChanged(), draftobjects.draftlink.DraftLink.onDocumentRestored(), draftobjects.patharray.PathArray.onDocumentRestored(), and draftobjects.pathtwistedarray.PathTwistedArray.onDocumentRestored().

◆ findMinZ()

def PathScripts.PathDressupRampEntry.ObjectDressup.findMinZ (   self,
  edges 
)

◆ generateHelix()

◆ generateRamps()

def PathScripts.PathDressupRampEntry.ObjectDressup.generateRamps (   self,
  allowBounce = True 
)

References draftguitools.gui_rotate.Rotate.angle, ap203_configuration_controlled_3d_design_of_mechanical_parts_and_assemblies_mim_lf.polar_complex_number_literal.angle, ap203_configuration_controlled_3d_design_of_mechanical_parts_and_assemblies_mim_lf.runout_zone_orientation.angle, automotive_design.revolved_area_solid.angle, automotive_design.revolved_face_solid.angle, Measure::Measurement.angle(), Measure::MeasurementPy.angle(), SoGestureSwipeEvent.angle, DraftGui.DraftToolBar.angle, draftguitools.gui_arcs.Arc.angle, drafttaskpanels.task_polararray.TaskPanelPolarArray.angle, ap203_configuration_controlled_3d_design_of_mechanical_parts_and_assemblies_mim_lf.revolved_area_solid.angle, ap203_configuration_controlled_3d_design_of_mechanical_parts_and_assemblies_mim_lf.revolved_face_solid.angle, automotive_design.runout_zone_orientation.angle, ifc2x3.ifcrevolvedareasolid.angle, ifc4.ifcrevolvedareasolid.angle, PartGui::DimensionAngular.angle, PartGui::ArcEngine.angle, PartDesign::Hole::CutDimensionSet.angle, Mod.PartDesign.fcgear.fcgeardialog.GearCreationFrame.angle, geoff_geometry::Span.angle, PathScripts.PathDressupDogbone.Bone.angle(), PathScripts.PathDressupHoldingTags.Tag.angle, PathScripts.PathDressupRampEntry.ObjectDressup.angle, PathScripts.PathDressupTag.TagSolid.angle, KDL::RotationalInterpolation_SingleAxis.angle, GCS::ConstraintP2PAngle.angle(), GCS::ConstraintL2LAngle.angle(), GCS::ConstraintAngleViaPoint.angle(), TechDraw::incidenceItem.angle, TechDraw::Ellipse.angle, PathScripts.PathDressupRampEntry.ObjectDressup.checkIgnoreAbove(), PathScripts.PathDressupRampEntry.ObjectDressup.createRampMethod1(), PathScripts.PathDressupRampEntry.ObjectDressup.createRampMethod2(), PathScripts.PathDressupRampEntry.ObjectDressup.createRampMethod3(), PathScripts.PathDressupRampEntry.ObjectDressup.ignoreAbove, Gui::Dialog::DlgSettingsImageImp.method(), ap203_configuration_controlled_3d_design_of_mechanical_parts_and_assemblies_mim_lf.action_request_solution.method, automotive_design.action_request_solution.method, config_control_design.action_request_solution.method, MeshGui::DlgSmoothing.method(), MeshGui::SmoothingDialog.method(), Py::MethodTable.method(), MeshPart::Mesher.method, geoff_geometry::SpanDataObject.method, PathScripts.PathDressupRampEntry.ObjectDressup.method, DrawSketchHandlerEllipse.method, PathScripts.PathDressupLeadInOut.ObjectDressup.rapids, PathScripts.PathDressupRampEntry.ObjectDressup.rapids, Mod.PartDesign.fcgear.fcgear.FCWireBuilder.wire, Mod.PartDesign.fcsprocket.fcsprocket.FCWireBuilder.wire, WireInfo.wire, PathScripts.PathDressupLeadInOut.ObjectDressup.wire, PathScripts.PathDressupRampEntry.ObjectDressup.wire, PathScripts.PathDressupTag.ObjectDressup.wire, and PathScripts.PathPocketShape.Extension.wire.

Referenced by PathScripts.PathDressupRampEntry.ObjectDressup.execute().

◆ getreversed()

def PathScripts.PathDressupRampEntry.ObjectDressup.getreversed (   self,
  edges 
)

◆ getSplitPoint()

◆ onChanged()

◆ onDocumentRestored()

◆ setEditorProperties()

◆ setup()

Member Data Documentation

◆ angle

◆ ignoreAbove

◆ ignoreAboveEnabled

PathScripts.PathDressupRampEntry.ObjectDressup.ignoreAboveEnabled

◆ method

◆ obj

PathScripts.PathDressupRampEntry.ObjectDressup.obj

Referenced by ArchAxis.ArchGridTaskPanel.accept(), ArchProfile.ProfileTaskPanel.accept(), ArchReference.ArchReferenceTaskPanel.accept(), femtaskpanels.task_constraint_sectionprint._TaskPanel.accept(), femtaskpanels.task_constraint_tie._TaskPanel.accept(), femtaskpanels.task_element_fluid1D._TaskPanel.accept(), femtaskpanels.task_element_geometry1D._TaskPanel.accept(), femtaskpanels.task_element_geometry2D._TaskPanel.accept(), femtaskpanels.task_element_rotation1D._TaskPanel.accept(), femtaskpanels.task_material_common._TaskPanel.accept(), femtaskpanels.task_material_reinforced._TaskPanel.accept(), femtaskpanels.task_mesh_boundarylayer._TaskPanel.accept(), femtaskpanels.task_mesh_group._TaskPanel.accept(), femtaskpanels.task_mesh_region._TaskPanel.accept(), AttachmentEditor.TaskAttachmentEditor.AttachmentEditorTaskPanel.accept(), PathScripts.PathSetupSheetGui.OpTaskPanel.accept(), shipOutlineDraw.TaskPanel.TaskPanel.accept(), ArchComponent.ComponentTaskPanel.acceptIfcProperties(), PathScripts.PathOpGui.TaskPanelBaseGeometryPage.addBase(), PathScripts.PathEngraveGui.TaskPanelBaseGeometryPage.addBaseGeometry(), PathScripts.PathOpGui.TaskPanelBaseGeometryPage.addBaseGeometry(), PathScripts.PathVcarveGui.TaskPanelBaseGeometryPage.addBaseGeometry(), ArchSpace.SpaceTaskPanel.addBoundary(), PathScripts.PathPropertyBagGui.TaskPanel.addCustomProperty(), PathScripts.PathPropertyBag.PropertyBag.addCustomProperty(), ArchAxis.AxisSystemTaskPanel.addElement(), ArchComponent.ComponentTaskPanel.addElement(), ArchSectionPlane.SectionPlaneTaskPanel.addElement(), DraftGui.FacebinderTaskPanel.addElement(), PathScripts.PathOpGui.TaskPanelBaseLocationPage.addLocationAt(), PathScripts.PathDressupTagGui.PathDressupTagTaskPanel.addNewTagAt(), PathScripts.PathJob.ObjectJob.addOperation(), AttachmentEditor.TaskAttachmentEditor.AttachmentEditorTaskPanel.addSelection(), PathScripts.PathJob.ObjectJob.addToolController(), PathScripts.PathJobGui.TaskPanel.alignCenterInStock(), PathScripts.PathJobGui.TaskPanel.alignCenterInStockXY(), PathScripts.PathJobGui.TaskPanel.alignSetOrigin(), PathScripts.PathJob.ObjectJob.allOperations(), PathScripts.PathDressupTagGui.PathDressupTagViewProvider.allow(), PathScripts.PathDressupDogbone.Bone.angle(), Mod.PartDesign.SprocketFeature.SprocketTaskPanel.ANSISizeChanged(), PathScripts.PathDressupTag.ObjectDressup.assignDefaultValues(), PathScripts.PathDressupAxisMap.ViewProviderDressup.attach(), PathScripts.PathDressupDogbone.ViewProviderDressup.attach(), PathScripts.PathDressupLeadInOut.ViewProviderDressup.attach(), PathScripts.PathDressupRampEntry.ViewProviderDressup.attach(), PathScripts.PathDressupTagGui.PathDressupTagViewProvider.attach(), PathScripts.PathJobGui.ViewProvider.attach(), PathScripts.PathPropertyBagGui.ViewProvider.attach(), PathScripts.PathSetupSheetGui.ViewProvider.attach(), PathScripts.PathToolBitGui.ViewProvider.attach(), ArchComponent.ComponentTaskPanel.check(), femtaskpanels.task_material_common._TaskPanel.check_material_keys(), PathScripts.PathCircularHoleBaseGui.TaskPanelHoleGeometryPage.checkedChanged(), PathScripts.PathJobGui.StockFromBaseBoundBoxEdit.checkXpos(), PathScripts.PathJobGui.StockFromBaseBoundBoxEdit.checkYpos(), PathScripts.PathJobGui.StockFromBaseBoundBoxEdit.checkZpos(), ArchReference.ArchReferenceTaskPanel.chooseFile(), PathScripts.PathDressupAxisMap.ViewProviderDressup.claimChildren(), PathScripts.PathDressupDogbone.ViewProviderDressup.claimChildren(), PathScripts.PathDressupLeadInOut.ViewProviderDressup.claimChildren(), PathScripts.PathDressupPathBoundaryGui.DressupPathBoundaryViewProvider.claimChildren(), PathScripts.PathDressupRampEntry.ViewProviderDressup.claimChildren(), PathScripts.PathDressupTagGui.PathDressupTagViewProvider.claimChildren(), PathScripts.PathDressupZCorrect.ViewProviderDressup.claimChildren(), PathScripts.PathJobGui.ViewProvider.claimChildren(), PathScripts.PathToolBitGui.ViewProvider.claimChildren(), Texture.ViewProviderTexture.claimChildren(), shipAreasCurve.Preview.Preview.clean(), shipOutlineDraw.Preview.Preview.clean(), PathScripts.PathDressupPathBoundaryGui.TaskPanel.cleanup(), PathScripts.PathPocketShapeGui.TaskPanelExtensionPage.cleanupPage(), PathScripts.PathOpGui.TaskPanelBaseGeometryPage.clearBase(), AttachmentEditor.TaskAttachmentEditor.AttachmentEditorTaskPanel.clicked(), Mod.PartDesign.SprocketFeature.SprocketTaskPanel.clicked(), PathScripts.PathDressupTagGui.PathDressupTagTaskPanel.clicked(), PathScripts.PathDressupTagGui.PathDressupTagTaskPanel.copyNewTags(), PathScripts.PathPocketShapeGui.TaskPanelExtensionPage.createItemForBaseModel(), shipOutlineDraw.TaskPanel.TaskPanel.createPreview(), PathScripts.PathDressupHoldingTags.PathData.defaultTagHeight(), ArchSpace.SpaceTaskPanel.delBoundary(), PathScripts.PathCircularHoleBaseGui.TaskPanelHoleGeometryPage.deleteBase(), PathScripts.PathOpGui.TaskPanelBaseGeometryPage.deleteBase(), PathScripts.PathDressupHoldingTags.ObjectTagDressup.doExecute(), draftguitools.gui_lines.Line.drawSegment(), draftguitools.gui_beziers.BezCurve.drawUpdate(), draftguitools.gui_beziers.CubicBezCurve.drawUpdate(), draftguitools.gui_splines.BSpline.drawUpdate(), ArchComponent.ComponentTaskPanel.editClass(), ArchComponent.ComponentTaskPanel.editIfcProperties(), PathScripts.PathJobGui.ViewProvider.editObject(), ArchComponent.ComponentTaskPanel.editObject(), PathScripts.PathDressupTagGui.PathDressupTagTaskPanel.editTagAt(), PathScripts.PathToolControllerGui.DlgToolControllerEdit.exec_(), PathScripts.PathPropertyBagGui.PropertyCreate.exec_(), PathScripts.PathDressupTag.ObjectDressup.execute(), ArchSchedule.ArchScheduleTaskPanel.export(), ArchSchedule.ArchScheduleTaskPanel.exportCSV(), ArchSchedule.ArchScheduleTaskPanel.exportMD(), PathScripts.PathSetupSheet.SetupSheet.expressionReference(), PathScripts.PathSurfaceSupport.ProcessSelectedFaces.findUnifiedRegions(), draftguitools.gui_edit.Edit.finish(), draftguitools.gui_trimex.Trimex.finish(), draftguitools.gui_beziers.BezCurve.finish(), draftguitools.gui_beziers.CubicBezCurve.finish(), draftguitools.gui_splines.BSpline.finish(), PathScripts.PathDressupTagGui.PathDressupTagTaskPanel.generateNewTags(), PathScripts.PathSurfaceSupport.PathGeometryGenerator.generatePathGeometry(), ArchSectionPlane.SectionPlaneTaskPanel.getBB(), PathScripts.PathPropertyBag.PropertyBag.getCustomProperties(), PathScripts.PathJob.ObjectJob.getCycleTime(), PathScripts.PathDressupAxisMap.TaskPanel.getFields(), PathScripts.PathDressupDogbone.TaskPanel.getFields(), PathScripts.PathDressupDragknife.TaskPanel.getFields(), PathScripts.PathDressupLeadInOut.TaskPanel.getFields(), PathScripts.PathDressupTagGui.PathDressupTagTaskPanel.getFields(), PathScripts.PathDressupZCorrect.TaskPanel.getFields(), PathScripts.PathJobGui.TaskPanel.getFields(), PathScripts.PathSetupSheetGui.GlobalEditor.getFields(), PathScripts.PathToolControllerGui.TaskPanel.getFields(), PathScripts.PathToolBitGui.ViewProvider.getIcon(), PathScripts.PathGetPoint.TaskPanel.getPoint(), ArchSchedule.ArchScheduleTaskPanel.getRows(), PathScripts.PathPocketShape.Extension.getSubLink(), PathScripts.PathPocketShape.Extension.getWire(), PathScripts.PathSetupSheet.SetupSheet.hasDefaultCoolantMode(), PathScripts.PathSetupSheet.SetupSheet.hasDefaultOperationDepths(), PathScripts.PathSetupSheet.SetupSheet.hasDefaultOperationHeights(), PathScripts.PathSetupSheet.SetupSheet.hasDefaultToolRapids(), ArchAxis.CommandArchGrid.IsActive(), PathScripts.PathJobGui.TaskPanel.jobModelEdit(), PathScripts.PathJobGui.TaskPanel.modelSet0(), draftguitools.gui_edit.Edit.mousePressed(), draftguitools.gui_edit.Edit.numericInput(), Mod.PartDesign.SprocketFeature.SprocketTaskPanel.numTeethChanged(), PathScripts.PathDressupPathBoundary.DressupPathBoundary.onDcoumentRestored(), PathScripts.PathDressupLeadInOut.ViewProviderDressup.onDelete(), PathScripts.PathDressupRampEntry.ViewProviderDressup.onDelete(), PathScripts.PathDressupTagGui.PathDressupTagViewProvider.onDelete(), PathScripts.PathJobGui.ViewProvider.onDelete(), PathScripts.PathDressupHoldingTags.ObjectTagDressup.onDocumentRestored(), PathScripts.PathIconViewProvider.ViewProvider.onEdit(), shipOutlineDraw.TaskPanel.TaskPanel.onTableItem(), ArchReference.ArchReferenceTaskPanel.openFile(), PathScripts.PathSetupSheet.SetupSheet.operationsWithSettings(), draftguitools.gui_lines.Line.orientWP(), femtaskpanels.task_material_reinforced._TaskPanel.output_obj_mat_param(), PathScripts.PathOpGui.TaskPanelPage.pageCleanup(), PathScripts.PathOpGui.TaskPanelPage.pageGetFields(), PathScripts.PathOpGui.TaskPanelPage.pageRegisterSignalHandlers(), PathScripts.PathOpGui.TaskPanelPage.pageSetFields(), PathScripts.PathOpGui.TaskPanel.panelSetFields(), AttachmentEditor.TaskAttachmentEditor.AttachmentEditorTaskPanel.parseAllRefLines(), PathScripts.PathSurfaceSupport.ProcessSelectedFaces.PathSurface(), PathScripts.PathSurfaceSupport.ProcessSelectedFaces.PathWaterline(), Mod.PartDesign.SprocketFeature.SprocketTaskPanel.pitchChanged(), PathScripts.PathGetPoint.TaskPanel.pointFinish(), PathScripts.PathJobGui.TaskPanel.preCleanup(), PathScripts.PathOpGui.TaskPanel.preCleanup(), PathScripts.PathSurfaceSupport.ProcessSelectedFaces.preProcessModel(), PathScripts.PathPropertyBagGui.TaskPanel.propertyAdd(), PathScripts.PathPropertyBagGui.TaskPanel.propertyModifyIndex(), PathScripts.PathPropertyBagGui.TaskPanel.propertyRemove(), AttachmentEditor.TaskAttachmentEditor.AttachmentEditorTaskPanel.readParameters(), ArchSectionPlane.SectionPlaneTaskPanel.recenter(), femtaskpanels.task_constraint_sectionprint._TaskPanel.recompute_and_set_back_all(), femtaskpanels.task_constraint_tie._TaskPanel.recompute_and_set_back_all(), femtaskpanels.task_element_fluid1D._TaskPanel.recompute_and_set_back_all(), femtaskpanels.task_element_geometry1D._TaskPanel.recompute_and_set_back_all(), femtaskpanels.task_element_geometry2D._TaskPanel.recompute_and_set_back_all(), femtaskpanels.task_element_rotation1D._TaskPanel.recompute_and_set_back_all(), femtaskpanels.task_material_common._TaskPanel.recompute_and_set_back_all(), femtaskpanels.task_material_reinforced._TaskPanel.recompute_and_set_back_all(), femtaskpanels.task_mesh_boundarylayer._TaskPanel.recompute_and_set_back_all(), femtaskpanels.task_mesh_group._TaskPanel.recompute_and_set_back_all(), femtaskpanels.task_mesh_region._TaskPanel.recompute_and_set_back_all(), PathScripts.PathPropertyBag.PropertyBag.refreshCustomPropertyGroups(), AttachmentEditor.TaskAttachmentEditor.AttachmentEditorTaskPanel.reject(), PathScripts.PathToolBitGui.TaskPanel.reject(), PathScripts.PathJobGui.TaskPanel.reject(), PathScripts.PathOpGui.TaskPanel.reject(), ArchAxis.AxisSystemTaskPanel.removeElement(), ArchComponent.ComponentTaskPanel.removeElement(), ArchSectionPlane.SectionPlaneTaskPanel.removeElement(), DraftGui.FacebinderTaskPanel.removeElement(), draftguitools.gui_lines.Line.removeTemporaryObject(), PathScripts.PathCircularHoleBaseGui.TaskPanelHoleGeometryPage.resetBase(), PathScripts.PathOpGui.TaskPanelPage.resetToolController(), ArchSectionPlane.SectionPlaneTaskPanel.resize(), Mod.PartDesign.SprocketFeature.SprocketTaskPanel.rollerDiameterChanged(), ArchSectionPlane.SectionPlaneTaskPanel.rotate(), ArchSchedule.ArchScheduleTaskPanel.select(), femtaskpanels.task_element_geometry1D._TaskPanel.set_beamsection_props(), femtaskpanels.task_element_fluid1D._TaskPanel.set_fluidsection_props(), femtaskpanels.task_mesh_boundarylayer._TaskPanel.set_mesh_boundarylayer_props(), PathScripts.PathJob.ObjectJob.setCenterOfRotation(), PathScripts.PathPocketShapeGui.TaskPanelExtensionPage.setExtensions(), PathScripts.PathDressupDogbone.TaskPanel.setFields(), PathScripts.PathDressupTagGui.PathDressupTagTaskPanel.setFields(), PathScripts.PathDressupZCorrect.TaskPanel.setFields(), PathScripts.PathJobGui.TaskPanel.setFields(), PathScripts.PathToolControllerGui.TaskPanel.setFields(), PathScripts.PathEngraveGui.TaskPanelBaseGeometryPage.setFields(), PathScripts.PathVcarveGui.TaskPanelBaseGeometryPage.setFields(), PathScripts.PathSetupSheet.SetupSheet.setFromTemplate(), PathScripts.PathCustomGui.TaskPanelOpPage.setGCode(), ArchMaterial.MultiMaterialDelegate.setModelData(), PathScripts.PathSetupSheet.SetupSheet.setOperationProperties(), PathScripts.PathProbeGui.TaskPanelOpPage.SetOutputFileName(), PathScripts.PathJobGui.TaskPanel.setPostProcessorOutputFile(), PathScripts.PathDressupZCorrect.TaskPanel.SetProbePointFileName(), shipOutlineDraw.TaskPanel.TaskPanel.setSectionType(), PathScripts.PathDressupHoldingTags.ObjectTagDressup.setup(), PathScripts.PathJobGui.ViewProvider.setupEditVisibility(), PathScripts.PathOpGui.TaskPanelPage.setupToolController(), PathScripts.PathDressupPathBoundaryGui.TaskPanel.setupUi(), PathScripts.PathDressupTagGui.PathDressupTagTaskPanel.setupUi(), PathScripts.PathOpGui.TaskPanel.setupUi(), PathScripts.PathSetupSheetGui.OpTaskPanel.setupUi(), PathScripts.PathSetupSheetGui.GlobalEditor.setupUi(), PathScripts.PathDressupHoldingTags.ObjectTagDressup.setXyEnabled(), draftguitools.gui_edit.Edit.startEditing(), PathScripts.PathJobGui.TaskPanel.tabPageChanged(), PathScripts.PathSetupSheet.SetupSheet.templateAttributes(), PathScripts.PathJob.ObjectJob.templateAttrs(), PathScripts.PathJobGui.TaskPanel.templateExport(), PathScripts.PathPocketShapeGui.TaskPanelExtensionPage.toggleExtensionCorners(), PathScripts.PathJobGui.TaskPanel.toolControllerAdd(), PathScripts.PathJobGui.TaskPanel.toolControllerSelect(), PathScripts.PathDressupTag.ObjectDressup.toolRadius(), Mod.PartDesign.SprocketFeature.SprocketTaskPanel.transferFrom(), Mod.PartDesign.SprocketFeature.SprocketTaskPanel.transferTo(), draftguitools.gui_trimex.Trimex.trimObject(), draftguitools.gui_beziers.BezCurve.undolast(), draftguitools.gui_beziers.CubicBezCurve.undolast(), draftguitools.gui_lines.Line.undolast(), draftguitools.gui_splines.BSpline.undolast(), ArchAxis.AxisSystemTaskPanel.update(), ArchAxis.ArchGridTaskPanel.update(), ArchComponent.ComponentTaskPanel.update(), ArchSectionPlane.SectionPlaneTaskPanel.update(), DraftGui.FacebinderTaskPanel.update(), shipAreasCurve.Preview.Preview.update(), shipOutlineDraw.Preview.Preview.update(), PathScripts.PathCircularHoleBaseGui.TaskPanelHoleGeometryPage.updateBase(), PathScripts.PathEngraveGui.TaskPanelBaseGeometryPage.updateBase(), PathScripts.PathOpGui.TaskPanelBaseGeometryPage.updateBase(), PathScripts.PathVcarveGui.TaskPanelBaseGeometryPage.updateBase(), PathScripts.PathDressupDogbone.TaskPanel.updateBoneList(), ArchSpace.SpaceTaskPanel.updateBoundaries(), PathScripts.PathJobGui.ViewProvider.updateData(), PathScripts.PathDressupPathBoundaryGui.TaskPanel.updateDressup(), PathScripts.PathDeburrGui.TaskPanelOpPage.updateExtraDepth(), PathScripts.PathPocketShapeGui.TaskPanelExtensionPage.updateItemEnabled(), PathScripts.PathOpGui.TaskPanelBaseLocationPage.updateLocations(), PathScripts.PathDressupTagGui.PathDressupTagViewProvider.updatePositions(), AttachmentEditor.TaskAttachmentEditor.AttachmentEditorTaskPanel.updatePreview(), PathScripts.PathGui.QuantitySpinBox.updateProperty(), PathScripts.PathJobGui.TaskPanel.updateSelection(), PathScripts.PathOpGui.TaskPanel.updateSelection(), PathScripts.PathGui.QuantitySpinBox.updateSpinBox(), PathScripts.PathDressupPathBoundaryGui.TaskPanel.updateStockEditor(), PathScripts.PathJobGui.TaskPanel.updateStockEditor(), PathScripts.PathJobGui.TaskPanel.updateToolController(), PathScripts.PathToolControllerGui.ToolControllerEditor.updateToolController(), PathScripts.PathJobGui.TaskPanel.updateTooltips(), draftguitools.gui_edit.Edit.updateTrackerAndGhost(), PathScripts.PathDressupAxisMap.TaskPanel.updateUI(), PathScripts.PathDressupDogbone.TaskPanel.updateUI(), PathScripts.PathDressupLeadInOut.TaskPanel.updateUI(), PathScripts.PathDressupZCorrect.TaskPanel.updateUI(), PathScripts.PathSetupSheetGui.GlobalEditor.updateUI(), PathScripts.PathToolControllerGui.ToolControllerEditor.updateUi(), PathScripts.PathProfileGui.TaskPanelOpPage.updateVisibility(), PathScripts.PathSlotGui.TaskPanelOpPage.updateVisibility(), PathScripts.PathDeburrGui.TaskPanelOpPage.updateWidth(), PathScripts.PathJobGui.StockFromBaseBoundBoxEdit.updateXpos(), PathScripts.PathJobGui.StockFromBaseBoundBoxEdit.updateYpos(), PathScripts.PathJobGui.StockFromBaseBoundBoxEdit.updateZpos(), draftguitools.gui_lines.Line.wipe(), AttachmentEditor.TaskAttachmentEditor.AttachmentEditorTaskPanel.writeParameters(), and ArchSchedule.ArchScheduleTaskPanel.writeValues().

◆ outedges

PathScripts.PathDressupRampEntry.ObjectDressup.outedges

◆ rapids

◆ wire


The documentation for this class was generated from the following file:
  • Sources/FreeCAD/src/Mod/Path/PathScripts/PathDressupRampEntry.py