#include <Geometry2d.h>

Public Member Functions
virtual Geometry2d *	clone (void) const
	returns a cloned object More...

	Geom2dPoint ()

	Geom2dPoint (const Base::Vector2d &)

	Geom2dPoint (const Handle(Geom2d_CartesianPoint)&)

virtual unsigned int	getMemSize (void) const
	This method is used to get the size of objects It is not meant to have the exact size, it is more or less an estimation which runs fast! Is it two bytes or a GB? More...

Base::Vector2d	getPoint (void) const

virtual PyObject *	getPyObject (void)
	This method returns the Python wrapper for a C++ object. More...

const	Handle (Geom2d_Geometry) &handle() const

virtual void	Restore (Base::XMLReader &)
	This method is used to restore properties from an XML document. More...

virtual void	Save (Base::Writer &) const
	This method is used to save properties to an XML document. More...

void	setPoint (const Base::Vector2d &)

virtual TopoDS_Shape	toShape () const

virtual	~Geom2dPoint ()

Public Member Functions inherited from Part::Geometry2d
virtual Geometry2d *	clone (void) const =0
	returns a cloned object More...

virtual unsigned int	getMemSize (void) const
	This method is used to get the size of objects It is not meant to have the exact size, it is more or less an estimation which runs fast! Is it two bytes or a GB? More...

virtual const	Handle (Geom2d_Geometry) &handle() const =0

virtual void	Restore (Base::XMLReader &)
	This method is used to restore properties from an XML document. More...

virtual void	Save (Base::Writer &) const
	This method is used to save properties to an XML document. More...

virtual TopoDS_Shape	toShape () const =0

virtual	~Geometry2d ()

Public Member Functions inherited from Base::Persistence
void	dumpToStream (std::ostream &stream, int compression)

virtual unsigned int	getMemSize () const =0
	This method is used to get the size of objects It is not meant to have the exact size, it is more or less an estimation which runs fast! Is it two bytes or a GB? More...

virtual Base::Type	getTypeId (void) const

virtual void	Restore (XMLReader &)=0
	This method is used to restore properties from an XML document. More...

virtual void	RestoreDocFile (Reader &)
	This method is used to restore large amounts of data from a file In this method you simply stream in your SaveDocFile() saved data. More...

void	restoreFromStream (std::istream &stream)

virtual void	Save (Writer &) const =0
	This method is used to save properties to an XML document. More...

virtual void	SaveDocFile (Writer &) const
	This method is used to save large amounts of data to a binary file. More...

Public Member Functions inherited from Base::BaseClass
	BaseClass ()
	Construction. More...

	BaseClass (const BaseClass &)=default

virtual PyObject *	getPyObject ()
	This method returns the Python wrapper for a C++ object. More...

virtual Type	getTypeId () const

bool	isDerivedFrom (const Type type) const

BaseClass &	operator= (const BaseClass &)=default

virtual void	setPyObject (PyObject *)

virtual	~BaseClass ()
	Destruction. More...

Additional Inherited Members
Static Public Member Functions inherited from Base::Persistence
static void *	create (void)

static std::string	encodeAttribute (const std::string &)
	Encodes an attribute upon saving. More...

static Base::Type	getClassTypeId (void)

static void	init (void)

Static Public Member Functions inherited from Base::BaseClass
static void *	create ()

static Type	getClassTypeId ()

static void	init ()

Protected Member Functions inherited from Part::Geometry2d
	Geometry2d ()

Static Protected Member Functions inherited from Base::BaseClass
static void	initSubclass (Base::Type &toInit, const char ClassName, const char ParentName, Type::instantiationMethod method=nullptr)

Constructor & Destructor Documentation

◆ Geom2dPoint() [1/3]

Geom2dPoint::Geom2dPoint ( )

◆ Geom2dPoint() [2/3]

Geom2dPoint::Geom2dPoint ( const Handle(Geom2d_CartesianPoint)& p )

References Handle().

◆ Geom2dPoint() [3/3]

Geom2dPoint::Geom2dPoint ( const Base::Vector2d & p )

◆ ~Geom2dPoint()

Geom2dPoint::~Geom2dPoint ( )

virtual

Member Function Documentation

◆ clone()

virtual Geometry2d * Part::Geom2dPoint::clone ( void ) const

virtual

returns a cloned object

Implements Part::Geometry2d.

Referenced by ArchPanel.CommandPanelSheet::Activated(), ArchStructure.CommandStructuralSystem::Activated(), ArchComponent.Component::execute(), ArchCurtainWall.CurtainWall::execute(), ArchTruss.Truss::execute(), Mod.PartDesign.WizardShaft.SegmentFunction.SegmentFunction::integrated(), and PathTests.TestPathHelix.TestPathHelix::test04().

◆ getMemSize()

unsigned int Geom2dPoint::getMemSize ( void ) const

virtual

This method is used to get the size of objects It is not meant to have the exact size, it is more or less an estimation which runs fast! Is it two bytes or a GB?

Reimplemented from Part::Geometry2d.

◆ getPoint()

Base::Vector2d Part::Geom2dPoint::getPoint ( void ) const

Referenced by ArchStructure.CommandStructuralSystem::Activated(), PathScripts.PathOpGui.TaskPanelBaseLocationPage::addLocation(), PathScripts.PathDressupTagGui.PathDressupTagTaskPanel::addNewTag(), PathScripts.PathOpGui.TaskPanelBaseLocationPage::editLocation(), PathScripts.PathDressupTagGui.PathDressupTagTaskPanel::editTag(), draftguitools.gui_arcs.Arc_3Points::getPoint(), ArchCurtainWall.CommandArchCurtainWall::getPoint(), ArchTruss.CommandArchTruss::getPoint(), PathScripts.PathDressupTagGui.PathDressupTagTaskPanel::modifyStandardButtons(), PathScripts.PathOpGui.TaskPanelBaseLocationPage::modifyStandardButtons(), and Save().

◆ getPyObject()

PyObject * Geom2dPoint::getPyObject ( void )

virtual

This method returns the Python wrapper for a C++ object.

It's in the responsibility of the programmer to do the correct reference counting. Basically there are two ways how to implement that: Either always return a new Python object then reference counting is not a matter or return always the same Python object then the reference counter must be incremented by one. However, it's absolutely forbidden to return always the same Python object without incrementing the reference counter.

The default implementation returns 'None'.

Reimplemented from Base::BaseClass.

References Handle().

◆ Handle()

const Part::Geom2dPoint::Handle ( Geom2d_Geometry ) const &

virtual

Implements Part::Geometry2d.

Referenced by Geom2dPoint(), getPyObject(), and toShape().

◆ Restore()

void Geom2dPoint::Restore ( Base::XMLReader & )

virtual

This method is used to restore properties from an XML document.

It uses the XMLReader class, which bases on SAX, to read the in Save() written information. Again the Vector as an example:

void PropertyVector::Restore(Base::XMLReader &reader)
{
  // read my Element
  reader.readElement("PropertyVector");
  // get the value of my Attribute
  _cVec.x = reader.getAttributeAsFloat("valueX");
  _cVec.y = reader.getAttributeAsFloat("valueY");
  _cVec.z = reader.getAttributeAsFloat("valueZ");
}

Reimplemented from Part::Geometry2d.

References Base::XMLReader::getAttributeAsFloat(), Base::XMLReader::readElement(), Part::Geometry2d::Restore(), and setPoint().

◆ Save()

void Geom2dPoint::Save ( Base::Writer & ) const

virtual

This method is used to save properties to an XML document.

A good example you'll find in PropertyStandard.cpp, e.g. the vector:

void PropertyVector::Save (Writer &writer) const
{
   writer << writer.ind() << "<PropertyVector valueX=\"" <<  _cVec.x <<
                                          "\" valueY=\"" <<  _cVec.y <<
                                          "\" valueZ=\"" <<  _cVec.z <<"\"/>" << endl;
}

The writer.ind() expression writes the indentation, just for pretty printing of the XML. As you see, the writing of the XML document is not done with a DOM implementation because of performance reasons. Therefore the programmer has to take care that a valid XML document is written. This means closing tags and writing UTF-8.

See also: Base::Writer

Reimplemented from Part::Geometry2d.

References getPoint(), Base::Writer::ind(), Part::Geometry2d::Save(), Base::Writer::Stream(), Point::x, and Point::y.

◆ setPoint()

void Part::Geom2dPoint::setPoint ( const Base::Vector2d & )

Referenced by drafttaskpanels.task_shapestring.ShapeStringTaskPanel::action(), drafttaskpanels.task_shapestring.ShapeStringTaskPanel::resetPoint(), and Restore().

◆ toShape()

TopoDS_Shape Geom2dPoint::toShape ( ) const

virtual

Implements Part::Geometry2d.

References Handle().

The documentation for this class was generated from the following files:

FreeCAD/src/Mod/Part/App/Geometry2d.h
FreeCAD/src/Mod/Part/App/Geometry2d.cpp

Public Member Functions

Additional Inherited Members

Constructor & Destructor Documentation

◆ Geom2dPoint() [1/3]

◆ Geom2dPoint() [2/3]

◆ Geom2dPoint() [3/3]

◆ ~Geom2dPoint()

Member Function Documentation

◆ clone()

◆ getMemSize()

◆ getPoint()

◆ getPyObject()

◆ Handle()

◆ Restore()

◆ Save()

◆ setPoint()

◆ toShape()