#include <E57Format.h>

Public Member Functions
void	checkInvariant (bool doRecurse=true, bool doUpcast=true)
	Check whether IntegerNode class invariant is true. More...

ImageFile	destImageFile () const
	Get the ImageFile that was declared as the destination for the node when it was created. More...

void	dump (int indent=0, std::ostream &os=std::cout) const
	Diagnostic function to print internal state of object to output stream in an indented format. More...

ustring	elementName () const
	Get elementName string, that identifies the node in its parent. More...

	IntegerNode ()=delete

	IntegerNode (const Node &n)
	Downcast a generic Node handle to a IntegerNode handle. More...

	IntegerNode (ImageFile destImageFile, int64_t value=0, int64_t minimum=E57_INT64_MIN, int64_t maximum=E57_INT64_MAX)
	Create an E57 element for storing a integer value. More...

bool	isAttached () const
	Has node been attached into the tree of an ImageFile. More...

bool	isRoot () const
	Is this a root node. More...

int64_t	maximum () const
	Get the declared maximum that the value may take. More...

int64_t	minimum () const
	Get the declared minimum that the value may take. More...

	operator Node () const
	Upcast a IntegerNode handle to a generic Node handle. More...

Node	parent () const
	Return parent of node, or self if a root node. More...

ustring	pathName () const
	Get absolute pathname of node. More...

int64_t	value () const
	Get integer value stored. More...

Constructor & Destructor Documentation

◆ IntegerNode() [1/3]

e57::IntegerNode::IntegerNode ( )

delete

◆ IntegerNode() [2/3]

IntegerNode::IntegerNode	(	ImageFile	destImageFile,
		int64_t	value = `0`,
		int64_t	minimum = `E57_INT64_MIN`,
		int64_t	maximum = `E57_INT64_MAX`
	)

explicit

Create an E57 element for storing a integer value.

Parameters

[in]	destImageFile	The ImageFile where the new node will eventually be stored.
[in]	value	The integer value of the element.
[in]	minimum	The smallest value that the element may take.
[in]	maximum	The largest value that the element may take.

An IntegerNode stores an integer value, and a lower and upper bound. The IntegerNode class corresponds to the ASTM E57 standard Integer element. See the class discussion at bottom of IntegerNode page for more details.

The destImageFile indicates which ImageFile the IntegerNode will eventually be attached to. A node is attached to an ImageFile by adding it underneath the predefined root of the ImageFile (gotten from ImageFile::root). It is not an error to fail to attach the IntegerNode to the destImageFile. It is an error to attempt to attach the IntegerNode to a different ImageFile.

Warning: it is an error to give an value outside the minimum / maximum bounds, even if the IntegerNode is destined to be used in a CompressedVectorNode prototype (where the value will be ignored). If the IntegerNode is to be used in a prototype, it is recommended to specify a value = 0 if 0 is within bounds, or a value = minimum if 0 is not within bounds.

Precondition: The destImageFile must be open (i.e. destImageFile.isOpen() must be true).; The destImageFile must have been opened in write mode (i.e. destImageFile.isWritable() must be true).; minimum <= value <= maximum

Returns: A smart IntegerNode handle referencing the underlying object.

Exceptions

E57_ERROR_BAD_API_ARGUMENT
E57_ERROR_IMAGEFILE_NOT_OPEN
E57_ERROR_FILE_IS_READ_ONLY
E57_ERROR_VALUE_OUT_OF_BOUNDS
E57_ERROR_INTERNAL	All objects in undocumented state

See also: IntegerNode::value, Node, CompressedVectorNode, CompressedVectorNode::prototype

◆ IntegerNode() [3/3]

IntegerNode::IntegerNode ( const Node & n )

explicit

Downcast a generic Node handle to a IntegerNode handle.

Parameters

[in] n The generic handle to downcast.

The handle n must be for an underlying IntegerNode, otherwise an exception is thrown. In designs that need to avoid the exception, use Node::type() to determine the actual type of the n before downcasting. This function must be explicitly called (c++ compiler cannot insert it automatically).

Returns: A smart IntegerNode handle referencing the underlying object.

Exceptions

E57_ERROR_BAD_NODE_DOWNCAST

See also: Node::type(), IntegerNode::operator Node()

Set our shared_ptr to the downcast shared_ptr

References e57::E57_ERROR_BAD_NODE_DOWNCAST, e57::E57_INTEGER, and e57::toString().

Member Function Documentation

◆ checkInvariant()

void IntegerNode::checkInvariant	(	bool	doRecurse = `true`,
		bool	doUpcast = `true`
	)

Check whether IntegerNode class invariant is true.

Parameters

[in]	doRecurse	If true, also check invariants of all children or sub-objects recursively.
[in]	doUpcast	If true, also check invariants of the generic Node class.

This function checks at least the assertions in the documented class invariant description (see class reference page for this object). Other internal invariants that are implementation-dependent may also be checked. If any invariant clause is violated, an E57Exception with errorCode of E57_ERROR_INVARIANCE_VIOLATION is thrown.

Checking the invariant recursively may be expensive if the tree is large, so should be used judiciously, in debug versions of the application.

Postcondition: No visible state is modified.

Exceptions

E57_ERROR_INVARIANCE_VIOLATION or any other E57 ErrorCode

References e57::Node::checkInvariant(), destImageFile(), e57::E57_ERROR_INVARIANCE_VIOLATION, maximum(), minimum(), and value().

◆ destImageFile()

ImageFile IntegerNode::destImageFile ( ) const

Get the ImageFile that was declared as the destination for the node when it was created.

The first argument of the constructors of each of the 8 types of nodes is an ImageFile that indicates which ImageFile the node will eventually be attached to. This function returns that constructor argument. It is an error to attempt to attach the node to a different ImageFile. However it is not an error to not attach the node to any ImageFile (it's just wasteful). Use Node::isAttached to check if the node actually did get attached.

Postcondition: No visible object state is modified.

Returns: The ImageFile that was declared as the destination for the node when it was created.

See also: Node::isAttached, StructureNode::StructureNode(), VectorNode::VectorNode(), CompressedVectorNode::CompressedVectorNode(), IntegerNode::IntegerNode(), ScaledIntegerNode::ScaledIntegerNode(), FloatNode::FloatNode(), StringNode::StringNode(), BlobNode::BlobNode()

Referenced by checkInvariant().

◆ dump()

void IntegerNode::dump	(	int	indent = `0`,
		std::ostream &	os = `std::cout`
	)		const

Diagnostic function to print internal state of object to output stream in an indented format.

Parameters

[in]	indent	Number of spaces to indent all the printed lines of this object.
[in]	os	Output stream to print on.

All objects in the E57 Foundation API (with exception of E57Exception) support a dump() function. These functions print out to the console a detailed listing of the internal state of objects. The content of these printouts is not documented, and is really of interest only to implementation developers/maintainers or the really adventurous users. In implementations of the API other than the Reference Implementation, the dump() functions may produce no output (although the functions should still be defined). The output format may change from version to version.

Postcondition: No visible object state is modified.

Exceptions

No	E57Exceptions

◆ elementName()

ustring IntegerNode::elementName ( ) const

Get elementName string, that identifies the node in its parent.

The elementName is a string associated with each parent-child link between nodes. For a given parent, the elementName uniquely identifies each of its children. Thus, any node in a tree can be identified by a sequence of elementNames that form a path from the tree's root node (see Node::pathName for more details).

Three types of nodes (the container node types) can be parents: StructureNode, VectorNode, and CompressedVectorNode. The children of a StructureNode are explicitly given unique elementNames when they are attached to the parent (using StructureNode::set). The children of VectorNode and CompressedVectorNode are implicitly given elementNames based on their position in the list (starting at "0"). In a CompressedVectorNode, the elementName can become quite large: "1000000000" or more. However in a CompressedVectorNode, the elementName string is not stored in the file and is deduced by the position of the child.

Precondition: The destination ImageFile must be open (i.e. destImageFile().isOpen()).

Postcondition: No visible state is modified.

Returns: The element name of the node, or "" if a root node.

Exceptions

E57_ERROR_IMAGEFILE_NOT_OPEN
E57_ERROR_INTERNAL	All objects in undocumented state

See also: Node::pathName, Node::parent, Node::isRoot

◆ isAttached()

bool IntegerNode::isAttached ( ) const

Has node been attached into the tree of an ImageFile.

Nodes are attached into an ImageFile tree by inserting them as children (directly or indirectly) of the ImageFile's root node. Nodes can also be attached to an ImageFile if they are used in the codecs or prototype trees of an CompressedVectorNode that is attached. Attached nodes will be saved to disk when the ImageFile is closed, and restored when the ImageFile is read back in from disk. Unattached nodes will not be saved to disk. It is not recommended to create nodes that are not eventually attached to the ImageFile.

Precondition: The destination ImageFile must be open (i.e. destImageFile().isOpen()).

Postcondition: No visible object state is modified.

Returns: true if node is child of (or in codecs or prototype of a child CompressedVectorNode of) the root node of an ImageFile.

Exceptions

E57_ERROR_IMAGEFILE_NOT_OPEN
E57_ERROR_INTERNAL	All objects in undocumented state

See also: Node::destImageFile, ImageFile::root

◆ isRoot()

bool IntegerNode::isRoot ( ) const

Is this a root node.

A root node has itself as a parent (it is not a child of any node). Newly constructed nodes (before they are inserted into an ImageFile tree) start out as root nodes. It is possible to temporarily create small trees that are unattached to any ImageFile. In these temporary trees, the top-most node will be a root node. After the tree is attached to the ImageFile tree, the only root node will be the pre-created one of the ImageTree (the one returned by ImageFile::root). The concept of attachment is slightly larger than that of the parent-child relationship (see Node::isAttached and CompressedVectorNode::CompressedVectorNode for more details).

Precondition: The destination ImageFile must be open (i.e. destImageFile().isOpen()).

Postcondition: No visible state is modified.

Returns: true if this node is a root node.

Exceptions

E57_ERROR_IMAGEFILE_NOT_OPEN
E57_ERROR_INTERNAL	All objects in undocumented state

See also: Node::parent, Node::isAttached, CompressedVectorNode::CompressedVectorNode

◆ maximum()

int64_t IntegerNode::maximum ( void ) const

Get the declared maximum that the value may take.

Precondition: The destination ImageFile must be open (i.e. destImageFile().isOpen()).

Postcondition: No visible state is modified.

Returns: The declared maximum that the value may take.

Exceptions

E57_ERROR_IMAGEFILE_NOT_OPEN
E57_ERROR_INTERNAL	All objects in undocumented state

See also: IntegerNode::value

Referenced by checkInvariant(), e57::ReaderImpl::GetData3DSizes(), and e57::ReaderImpl::ReadData3D().

◆ minimum()

int64_t IntegerNode::minimum ( void ) const

Get the declared minimum that the value may take.

Precondition: The destination ImageFile must be open (i.e. destImageFile().isOpen()).

Postcondition: No visible state is modified.

Returns: The declared minimum that the value may take.

Exceptions

E57_ERROR_IMAGEFILE_NOT_OPEN
E57_ERROR_INTERNAL	All objects in undocumented state

See also: IntegerCreate.cpp example, IntegerNode::value

Referenced by checkInvariant(), and e57::ReaderImpl::GetData3DSizes().

◆ operator Node()

IntegerNode::operator Node ( ) const

Upcast a IntegerNode handle to a generic Node handle.

An upcast is always safe, and the compiler can automatically insert it for initializations of Node variables and Node function arguments.

Returns: A smart Node handle referencing the underlying object.

Exceptions

No	E57Exceptions.

See also: explanation in Node, Node::type(), IntegerNode(const Node&)

Upcast from shared_ptr<IntegerNodeImpl> to SharedNodeImplPtr and construct a Node object

◆ parent()

Node IntegerNode::parent ( ) const

Return parent of node, or self if a root node.

Nodes are organized into trees (acyclic graphs) with a distinguished node (the "top-most" node) called the root node. A parent-child relationship is established between nodes to form a tree. Nodes can have zero or one parent. Nodes with zero parents are called root nodes. In the API, if a node has zero parents it is represented by having itself as a parent. Due to the set-once design of the API, a parent-child relationship cannot be modified once established. A child node can be any of the 8 node types, but a parent node can only be one of the 3 container node types (E57_STRUCTURE, E57_VECTOR, and E57_COMPRESSED_VECTOR). Each parent-child link has a string name (the elementName) associated with it (See Node::elementName for more details). More than one tree can be formed at any given time. Typically small trees are temporarily constructed before attachment to an ImageFile so that they will be written to the disk.

Warning: user algorithms that use this function to walk the tree must take care to handle the case where a node is its own parent (it is a root node). Use Node::isRoot to avoid infinite loops or infinite recursion.

Precondition: The destination ImageFile must be open (i.e. destImageFile().isOpen()).

Postcondition: No visible state is modified.

Returns: A smart Node handle referencing the parent node or this node if is a root node.

Exceptions

E57_ERROR_IMAGEFILE_NOT_OPEN
E57_ERROR_INTERNAL	All objects in undocumented state

See also: Node::isRoot, Node::isAttached, CompressedVectorNode::CompressedVectorNode, Node::elementName

Referenced by PathScripts.PathSimulatorGui.CAMSimTaskUi::accept(), Mod.PartDesign.WizardShaft.Shaft.Shaft::equilibrium(), PathScripts.PathSimulatorGui.CAMSimTaskUi::reject(), and PathScripts.PathOpGui.TaskPanelPage::setParent().

◆ pathName()

ustring IntegerNode::pathName ( ) const

Get absolute pathname of node.

Nodes are organized into trees (acyclic graphs) by a parent-child relationship between nodes. Each parent-child relationship has an associated elementName string that is unique for a given parent. Any node in a given tree can be identified by a sequence of elementNames of how to get to the node from the root of the tree. An absolute pathname string that is formed by arranging this sequence of elementNames separated by the "/" character with a leading "/" prepended.

Some example absolute pathNames: "/data3D/0/points/153/cartesianX", "/data3D/0/points", "/cameraImages/1/pose/rotation/w", and "/". These examples have probably been attached to an ImageFile. Here is an example absolute pathName of a node in a pose tree that has not yet been attached to an ImageFile: "/pose/rotation/w".

A technical aside: the elementName of a root node does not appear in absolute pathnames, since the "path" is between the staring node (the root) and the ending node. By convention, in this API, a root node has the empty string ("") as its elementName.

Precondition: The destination ImageFile must be open (i.e. destImageFile().isOpen()).

Postcondition: No visible state is modified.

Returns: The absolute path name of the node.

Exceptions

E57_ERROR_IMAGEFILE_NOT_OPEN
E57_ERROR_INTERNAL	All objects in undocumented state

See also: Node::elementName, Node::parent, Node::isRoot

◆ value()

int64_t IntegerNode::value ( ) const

Get integer value stored.

Precondition: The destination ImageFile must be open (i.e. destImageFile().isOpen()).

Postcondition: No visible state is modified.

Returns: integer value stored.

Exceptions

E57_ERROR_IMAGEFILE_NOT_OPEN
E57_ERROR_INTERNAL	All objects in undocumented state

See also: IntegerNode::minimum, IntegerNode::maximum

Referenced by checkInvariant(), PathScripts.PathProperty.Property::displayString(), PathScripts.PathProperty.PropertyQuantity::displayString(), PathScripts.PathSetupSheetOpPrototype.Property::displayString(), PathScripts.PathSetupSheetOpPrototype.PropertyQuantity::displayString(), Mod.PartDesign.WizardShaft.SegmentFunction.SegmentFunction::evaluate(), e57::ReaderImpl::GetData3DSizes(), PathScripts.PathProperty.Property::getValue(), PathScripts.PathSetupSheetOpPrototype.Property::getValue(), Mod.PartDesign.WizardShaft.SegmentFunction.IntervalFunction::lowervalue(), e57::ReaderImpl::ReadData3D(), PathScripts.PathProperty.Property::setValue(), and PathScripts.PathSetupSheetOpPrototype.Property::setValue().

The documentation for this class was generated from the following files:

FreeCAD/src/3rdParty/libE57Format/include/E57Format.h
FreeCAD/src/3rdParty/libE57Format/src/E57Format.cpp

Public Member Functions

Constructor & Destructor Documentation

◆ IntegerNode() [1/3]

◆ IntegerNode() [2/3]

◆ IntegerNode() [3/3]

Member Function Documentation

◆ checkInvariant()

◆ destImageFile()

◆ dump()

◆ elementName()

◆ isAttached()

◆ isRoot()

◆ maximum()

◆ minimum()

◆ operator Node()

◆ parent()

◆ pathName()

◆ value()